LevelOne FPC-0104TX, User Manual

Page: 14 / 35

-8-
9. In Networks dialog box, check the radio button before Install Microsoft
Windows Network and No Additional Network . Press OK to go back the
Network Settings screen.
10. Click Drivers... button to select network driver.
11. From Network Drivers dialog box, press Add Adapter... button to enter Add
Network Adapter dialog box. Select Unlisted or Updated Network Adapter and
press OK .
12. Windows will prompt a Install Driver dialog box; put the driver diskette into
floppy drive then press OK .
13. Select Enhanced mode NDIS3 for.... then press OK .
14. Follow Windows instructions to complete the installation and exit Windows
15. Reboot the computer to run with WFW 3.11.
2.2.5. Windows NT 3.51 & NT 4.0 Installation
Getting Start for Windows NT3.51
1. Run Windows NT 3.51
2. Login with a full access level , i.e. ADMINISTRATOR
3. Remove all existing network support
-- open
Program Manager
à
Main group
à
Control Panel
à
Network
-- remove all existing network components
Note: remove all adapters first, then servers, then workstations, etc.
4. Remove all s erial port support
-- open Program Manager
à
Main group
à
Control Panel
à
Ports
-- remove all the COM port devices
Note: If problems occur during removing the COM ports, check if the NT has
been updated to the lastest release from Microsoft.
-- after all serial port devices are removed, press
Close
Add PCMCIA to Your Laptop
1. Open Program Manager
à
Main group
à
Control Panel
à
Devices
2. Select PCMCIA
3. Press STARTUP
4. Select BOOT , then press OK
5. When all PCMCIA adapters are added, press Close and restart Windows NT
Check
Event Viewer when system reboots. Ask your laptop dealer for help if any
problems occur during the pre-installation.