LevelOne FCS-4042 Hardware User Manual Download Page 41

Page: 41 / 46

Hardware Manual

If you work with our cameras regularly, then

there is even a better way to discover the

cameras in the network

– by using

IP Utility

. The IP Utility is a light software tool that can not

only discover the cameras, but also list lots of valuable information, such as IP and MAC

addresses, serial numbers, firmware versions, etc, and allows quick configuration of multiple

devices at the same time.

The IP Utility can be downloaded for free from our website.

When you launch IP Utility, the list of connected cameras in the network will be shown. See

sample illustration below:

The camera model name is shown on the list. Click on the IP address to automatically launch the

default browser of the PC with the IP address of the target camera already filled in the address

bar of the browser.

Summary of Contents for FCS-4042















































Search results

Summary of Contents for FCS-4042

Reviews:

Related manuals for FCS-4042

Brands by name

Popular brands

LevelOne FCS-4042, Hardware User Manual

Search results

Summary of Contents for FCS-4042

Reviews:

Related manuals for FCS-4042

Brands by name

Popular brands