LevelOne FBR-1412TX User Manual Download

Page: 23 / 83

Renew IP Forever

: this feature enables this product to renew your IP address automatically when

the lease time is expiring-- even when the system is idle.

4.4.1.3 Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)

LAN IP Address

is the IP address of this product. It must be the default gateway of your

computers.

WAN Type is

Dynamic IP Address

. If the WAN type is not correct, change

it!

Host Name

: optional. Required by some ISPs, e.g. @Home.

•

Renew IP Forever

: this feature enable this product renew IP address

automatically when the lease time is being expired even the system is in idle
state.

4.4.1.4 PPP over Ethernet

PPPoE Account

and

Password

: the account and password your ISP assigned to you. For security,

this field appears blank. If you don't want to change the password, leave it empty.

PPPoE Service Name

: optional. Input the service name if your ISP requires it. Otherwise, leave it

blank.

Maximum Idle Time

: the amount of time of inactivity before disconnecting your PPPoE session.

Set it to zero or enable Auto-reconnect to disable this feature.

4.4.1.5 PPTP

My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to

you.

Server IP Address: the IP address of the PPTP server.

PPTP Account and Password: the account and password your ISP assigned to you. If you don't

want to change the password, keep it empty.

Connection ID: optional. Input the connection ID if your ISP requires it.

Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or

enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will

automatically connect to ISP after system is restarted or connection is dropped.

Summary of Contents for FBR-1412TX




















































































Search results

Summary of Contents for FBR-1412TX

Reviews:

Related manuals for FBR-1412TX

Brands by name

Popular brands

LevelOne FBR-1412TX, User Manual

Search results

Summary of Contents for FBR-1412TX

Reviews:

Related manuals for FBR-1412TX

Brands by name

Popular brands