button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the
Network
window. Select
TCP/IP
from the list of
Network Protocols
and then click the
Properties
button.
6: Check each of the tabs and verify the following settings:
•
IP Address:
Select
Obtain an IP address from a DHCP server
.
•
DNS:
Let all fields are blank.
•
WINS:
Let all fields are blank.
•
Routing:
Let all fields are blank.
7: Click
OK
to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note
: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 12).
12
Summary of Contents for FBR-1406TX
Page 1: ...LevelOne FBR 1406TX 2 PORT BROADBAND ROUTER W 4 LAN Port User s Manual Version 1 0 1...
Page 41: ...Click on one of the three NAT selections and proceed to the manual s relevant sub section 41...
Page 49: ...Click on one of the firewall selections and proceed to the manual s relevant sub section 49...
Page 58: ...58...
