Material
Metal
Operating Temperature
-40~185 F (-40~85C)
Operating Humidty
20-95% Non-condensing
Dimensions
54*13*9.5cm
Weight
1.5kgs
Packing Content:
1.
Rack PoE Surge Protector
2.
Grounding wire
3.
QIG
Installation Procedure:
1.
Connect RJ45 cable from PoE Switch port to PoE IN #8 on the Surge Protector and
other RJ45 cable from PoE OUT #8 to remote PoE PD (Powered Device) such as IP
camera, IP WiFi Access Point, etc. The overall Ethernet connection distance is not
longer than 100 meters. Suggest to add single surge protector prior to PoE PD
device if it does not embed with surge protection circuitry.
2.
The LED will be lit in green if IEEE 802.3at/af PoE (PSE injecting power via end-
point pin 1,2,3,6) is in use only. (It is not lit if no PoE is enabled and functioned.)
3.
Connect the grounding wire with the rack cabinet for grounding.
