LevelOne EAP-300 User Manual Download Page 70

Page: 70 / 156

(c)

7.3.3 System Upgrade

The EAP-300 provides a web firmware upload / upgrade feature. The administrator can download the

latest firmware from the website and save it on the administrator’s PC. To upgrade the system firmware,

click Browse to choose the new firmware file you downloaded onto your PC and then click Upload to

execute the process. There will be a prompt confirmation message appearing to notify the administrator

to restart the system after a successful firmware upgrade. Please restart the system after upgrading the

firmware.

System Upgrade Page

Note:

•

It is recommended to check the firmware version number before proceeding further.

Please make sure you have the correct firmware file.

•

Firmware upgrade may sometimes result in the loss of some data. Please ensure that all

necessary settings are written down before upgrading the firmware.

•

During firmware upgrade, please do not turn off the power. This may permanently

damage the system.

Summary of Contents for EAP-300





























































































































































Search results

Summary of Contents for EAP-300

Reviews:

Related manuals for EAP-300

Brands by name

Popular brands

LevelOne EAP-300, User Manual

Search results

Summary of Contents for EAP-300

Reviews:

Related manuals for EAP-300

Brands by name

Popular brands