LevelOne BOH-1300 Quick Installation Manual Download

Page: 1 / 4

- 1 -

BOH-1300

Outdoor Housing for Box Cameras (12VDC/24VAC)

Quick Installation Guide

H EC K YO U R PA C KAG E CO NT ENT S

The carton should contain the following items:

BOH-1300

Camera Bracket

Screw Kit

If any item is missing or damaged, please contact your local reseller for replacement.

Note: This installation should be completed by a qualified installer and should conform to all

local codes and regulations.

NTRO D UC TIO N

The BOH-1300 is made from extruded aluminum and is rated at IP-66.

There is built-in fan and heater included. The fan operates when the temperature reaches over

℃

and stops once the temperature stabilizes at 25

℃

again.

The built-in heater begins operation once the temperature is under 15

℃

and stops once the

temperature is over 25

℃

again.

Summary of Contents for BOH-1300

Page 1: ...nt Note This installation should be completed by a qualified installer and should conform to all local codes and regulations INTRODUCTION The BOH 1300 is made from extruded aluminum and is rated at IP...

Page 2: ...Open the top cover for installation C Close the top side and tighten the screws after installation You may use the included spacer to help position the camera at its ideal height D Firmly fasten came...

Page 3: ...3 E Loosen the screws to adjust the bracket INNER INSTRUCTION 4 4 4 4 4 1 2 3 1 Heater 2 Camera mounting platform 3 Power relay board 4 Fan...

Page 4: ...n 5 Power supply to heater Note AC and DC power can NOT operate simultaneously Please note the difference between positive and negative terminals when connecting power Default camera housing package d...