section 1.(4) ~ (6) to install ADE-8002 and cable. If the video connection is HDMI
type, you will need to use appropriate DVI-HDMI adaptor to connect. The
supported DVI-D resolution and distance is similar to regular DVI cable, the
estimated ranges are: 800x600@80m, 1024x768@70m, 1280x1024@60m,
1920x1200@35m. Previous range can be applied in most of the application, but in
some cases it might change. It will be appropriate to test the capacity of display
before installation.
(4)
RJ-11 AUDIO: The RJ-11 ports in the back of transmitter(ADE-8202/8204/8208)
support stereo audio. Please prepare one 4-wire phone cable or use 4 wires out of
the Cat5/5e/6 cable to make the RJ-11 connector. The pin definition of RJ-45 is
one to one and the supported length is 100 meters.
Connection of 2-Port Transmitter
Stack More Transmitters to Have More Displays
1. If you would like to broadcast more monitors and speakers, you can connect another
layer of same DVI broadcaster series products. You can connect additional Transmitter
from “DVI/AUDIO IN” port or “VIDEO OUT and AUDIO OUT” ports:
(1)
From “DVI/AUDIO OUT”: Use one set of standard DVI/Audio cable, one end
connect from the “DVI/AUDIO OUT” port of the first layer’s Transmitter and the
other end to “DVI/AUDIO IN” port of the second layer’s Transmitter.
(2)
From “VIDEO OUT and AUDIO OUT”: Similar to the way of connecting monitor
and speaker, you connect ADE-8001 and ADE-8011 to the “DVI/AUDIO IN” port of
the second layer’s Transmitter. The length for this extension should between 10
