DSS-1000 User Manual
117
Adding Users
1.
On the
Setup
screen, click
User
>
User
. By default, the “
admin
” user is preset and cannot
be deleted.
2.
Click
Add User
.
3.
Enter the following information:
Item
Description
Name
Enter a user name. The name can be up to 63 alphanumeric
characters; symbols are not allowed.
Password
Enter the password that will be used by the user to log into
DSS-1000.
Confirm Password
Re-type the password here. The two passwords must match.
User Group
Select the group to where the user belongs. This group defines
the access rights granted for the user.
4.
Click
OK
. The new user is added to the user table.
