Page 6
Using the Software CD to configure the camera
Power on your PC and insert the CD-ROM
The setup page should load automatically. If it does not, please
select your CD-ROM drive manually to open the setup page.
Select “
Install Software
”->”
Installation Wizard
” to initiate the
installation.(Figure1-1&1-2 &1-3)
Click “
Next
” to start the installation.( Figure 2-1)
If you wish to install the software program in an alternate
location, click “
Browse
”, otherwise click “
Install
” to move on to
the next step. (Figure 2-2)
Click “
Next
” to complete the software installation.(Figure 2-3)
Run “
EasyConfig Wizard
”. (Figure 2-4)
The
EasyConfig Wizard
will show MAC address and an IP
Address of available
LevelOne
Network Cameras. Highlight
the MAC address and double click to link to the selected
device.(Figure 2-5)
The default user name of
IP Camera
is “
admin
” and password
is “
admin
” (Figure 2-6)
The following screen would appear automatically. Click “
Next
”
and proceed.
(Figure 2-7&2-8)
Congratulations, you can use the camera through the network
to view the video.(Figure 2-9&2-10)
Installing IP CamSecure
Click ”
IP CamSecure
” and follow the onscreen instruction or refer to
the user’s manual to complete installation.(Figure 3-1)
English