LEVELFIX CCL 200 Series, User Manual

Page: 19 / 32

EN
19
CHECKING THE 90° ANGLE
(only for CCL260G) APPLICATIONS
•
pressing the ON button 2 times (all lines on).
• Mark point A on the floor (at the cross of the
•
•
•
WZRYHUWLFDOOLQHV
Mark point B at a hieght of 1m on the wall and
mark point C at the same height on the other
wall.
Turn the laser over point A until the centre of
the laser line on point A is on point C
Mark point D2 close to pint B.
ΖIWKHGL΍HUHQFHEHWZHHQSRLQWV%DQG'LV
RYHUPPWKHODVHUPXVWEHFDOLEUDWHGDQG
PXVWEHUHWXUQHGWRWKHUHVHOOHUWREH
UHFDOLEUDWHGLQDQDSSURYHGDIWHUVDOHVFHQWUH
If the laser settings are incorrect, this
should be reported to your distributor
who will send your laser to an approved
centre to be checked.
A
Position the laser at 5m from two walls with a
90° angle
B
C D