Tuff-Form Wet Floor Former
Installation And User Care Instructions
Guaranteed
for
Life
UK
UK
UK
UK
UK
Failure to install this AKW product in accordance with supplied instructions or the making of unauthorised modifications will
invalidate any warranty and will affect product safety.
AKW, Pointon Way, Hampton Lovett, Droitwich Spa, WR9 0LR
Tel.+44 (0) 1905 823298 - Fax. +44 (0) 1905 823297 - www.akw-ltd.co.uk
© 2013 AKW
03-060-003-04
To order additional products or parts please call: 01905 823299 or on the details above
900m
m
(3
5
1/
2")
900mm
(35
1/
2
")
1000
m
m
(39
1/
4")
1000mm
(39
1/
4
")
1200m
m
(47
1/
4")
1200mm
(47
1/
4
")
820m
m
(3
2
1/
4")
1300mm
(51
1/
4
")
82
0m
m
(32
1/
4")
1500mm
(59")
820m
m
(3
2
1/
4")
1800mm
(71")
900m
m
(35
1/
2")
1400mm
(55
1/
8
")
12
00m
m
(4
7
1/
4")
1500mm
(59")
770m
m
(3
0
1/
4")
1135mm
(44
3/
4
")
By rotating the rectangular trays by 180° the waste position moves in two directions to avoid the joists
180°
The Tuff-Form Range
Sizes Avaliable
Available Sizes
39
1/4”
x
39
1/4”
1000x
1000mm
44
3 /4”
x
30
1/4”
1135x
770mm
47
1/4”
x
47
1/4”
1200x
1200mm
51
1/4”
x
32
1/4”
1300x
820mm
55
1/8”
x
35
1/2”
1400x
900mm
59 ”
x
47
1/4”
1500x
1200mm
71 ”
x
32
1/4”
1800x
820mm
900x
900mm
35
1/2”
x
35
1/2”
59 ”
x
32
1/4”
1500x
820mm
Plastic capping strip
to cover vinyl floor covering.
Plastic coving
PGTF Shallow waste
Subscreed,
supporting Tuff-Form edges
and at least 50% of tray ribs
Complete level access
vinyl flooring to be set
over wet floor former
and floor.
Installed in screed, showing shallow waste (PGTF) for pump
Plastic capping strip
to cover vinyl floor covering.
Plastic coving
22mm
TFT75 shower gulley
or equivalent.
Complete level access
110mm
110mm
10.5mm
Installed in wood, 22m thickness to top of floorboards
(pack as required) showing gravity waste (TF75)
Vinyl floor/tanking for tiles
to be set over the wet
floor former and floor.
Specification:
When correctly installed according to these instructions the Tuff Form will be
suitable for a 40st wheelchair user and a carer in attendance.
For users up to 80st please contact AKW for specific advice relating to your
individual installation.
Do not use
gypsum based dry-wall adhesives to install a Tuff Form.
“Dot-N-Dab” adhesives do not hold moisture resistant properties and this
type of adhesive has not been tested by the manufacturers to receive live
loads. They are only suitable for internal bonding dry lining applications on dry
substrates.
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent
in imperial, therefore all dimensions are approximate and subject to manufacturing tolerances.
These instructions are offered as advised minimum standards of installation and recommended best practice for the
installation of a Tuff Form. Due to the very wide variability of possible installation conditions AKW Ltd does not make any
warranty, expressed or implied, or accept any liability in connection with this information or its use.
This information is furnished upon the condition that the person receiving it shall make his/her own tests to determine the
suitability thereof for his/her particular purpose.
Noggins within 100mm of waste
omitted for clarity
Patented: GB2401341
UK
USA
EU
UK
UK
UK
Read ALL instructions carefully BEFORE installation and leave with the end user
Technical Help line
01905 560219
Quotes & orders email
Enquiries email
Contact
For latest AKW news and
products, scan this code
with your phone or tab
device.
DoP 03-061-003