Colour: White Internal Building use only Int Patent Pending
WRcNSF Tested to BS EN 274-2:2002
Installer: Please ensure that this information is left
with the end user of this product.
ALWAYS
read the installation instructions before installing
this product.
ALWAYS
read the installation and end user care instructions.
ALWAYS
match the correct waste to the shower base.
ALWAYS
have the waste installed by a trained
and experienced skilled craftsman.
NEVER
use the waste without the unit fully
assembled.
NEVER
use solvent weld pipe or fittings.
BEWARE
A child finger trap may be present during the
handling or use of this product.
ALWAYS
Keep fingers clear of the gaps between the cover,
and the locking ring.
DO NOT
place matches or cigarettes on or near this product.
The following plastic materials are used in this
product: Acrylonitrile Butadiene Styrene (ABS),
Ethylene Propylene Thermoplastic Rubber (EPTPR)
GW50 Gravity Waste
Installation and user care instructions
To fit hole diameter of 50mm and 50mm water trap
Assembled
Dismantled for cleaning;
No tools required
For further details on this and other AKW products please contact your distributor
- see details on outer packaging
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in imperial, therefore all
dimensions are approximate and subject to manufacturing tolerances. AKW MediCare does not make any warranty, expressed or implied, or accept any
liability in connection with this information or its use. This information is furnished upon the condition that the person receiving it shall make his/her own
tests to determine the suitability thereof for his/her particular purpose.
AKW
MediCare
PA R T N E R S I N C A R E
© 2009 AKW Medi-Care Limited
www.akw-medicare.com
03-055-010-04
