Level 1 Lasers M503 Operating Instructions Manual Download Page 4

Page: 4 / 8

M503

OPERATING INSTRUCTIONS

Battery Instructions

Screw the bottom base of the M503 laser onto the ground, a tripod (included

in M50322 kit) or wall mounted then level the laser by first turning the

levelling wheel for the “X” while looking at the “X” vial above it, once the

bubble is central in the vial adjust the “Y” axis in the same manner using the

“Y” vial levelling wheel, continue adjusting both axis until both top vials show

the bubble exactly central (NOTE: the more accurate you are at setting the

vials the more accurate the level will be). Once level, power up by rotating

the black power button knob, the head will rotate and laser emit.

The M503 operates on 4 x standard Alkaline “AA” batteries, first remove

the battery compartment cover by undoing the black locking knob. Insert

batteries into the battery compartment as indicated, make sure the polarities

are correct before replacing the cover.

Levelling and Turning on Laser

(Horizontal Operation)

www.level1lasers.com.au

“X” Axis

“Y” Axis

Vial and Levelling

Wheel

Vial and Levelling

Wheel

Summary of Contents for M503








