levante-products.com
LEV0412/Page 3 of 12/Issue
2
/0
1
.1
7
2.3 Steps
1) It is essential that the heater IS FIRMLY FIXED TO A FIRM
WALL AND LEVELLED.
2) Remove the template indicating the drill holes from the
packing case.
3) Check if there is a mains socket near the heater location.
4) Insert the four 8mm diameter wall plugs into the four drill
holes and fix the two brackets to the wall with the four
5.5 x 50mm screws.
5) Screw the two M6 x 40 screws into each bracket.
6) Position the heater on the lower part of the brackets.
7) Secure the heater to the upper parts of the brackets:
8) Fully screw in the two M6 x 40mm screws to fix the heater
to the wall.
Position and secure the heater on
the upper part of the brackets in
the corresponding lugs.
Press downwards to fit into place.
