14
Talk to Baby Function
1. On the front of the parent unit, press and hold the Talk button.
2. Speak directly into the front of the parent unit, where a microphone is located.
3. When you are finished talking, simply release the Talk button.
LED Flashlight
1. Press and hold the flashlight button
on the front of the parent unit, the LED light
on the right side of the unit will light up.
2. To turn off the LED flashlight, release the flashlight button
.
Volume
1. Press the up
and down
buttons on the front of the parent unit to adjust the
volume. One bar is the lowest volume setting, five bars is the highest setting.
Energy Save Switch
This monitor has two range settings, long distance and eco, which would
use less battery power when longer distance transmission is not required.
1. Flip the SEDS switch on the back of the baby unit up to set the system
to long distance transmission mode.
2. Flip the SEDS switch to the bottom, to ECO mode when longer
distance transmission is not required, or longer battery life is needed.
OPERATION - PARENT UNIT
Parent Unit Page Button
If you cannot find the parent unit and it is still powered on, you can press the page button
on the baby unit that sounds an alarm to assist you in finding it.
1. Press the Page button
on the front of the baby unit.
2. The parent unit will sound a loud alarm.
3. Once you find the parent unit, you can turn off the alarm by pressing the Page button
on the baby unit or any button on the parent unit.
OPERATION - BABY UNIT
$/,9(%(57B7:LQGG
30
