7
BABY UNIT OPERATION
This system is capable of running on batteries or AC adapter.
Battery Powered
1.
Remove the battery compartment cover on the back of the baby unit using a small
cross head screwdriver.
2.
Slide cover down and off using your thumb.
3.
Install 3 AAA batteries.
4.
Replace battery compartment cover.
Adapter Powered
1.
Plug the small end of the AC adapter into the 6V DC jack on the right hand side of
the baby unit.
2.
Plug the other end of the AC adapter into any available wall outlet.
Turning On
1.
Press the button on the top of the baby unit.
2.
A green LED on the front of the baby unit will indicate there is power.
3.
To Turn OFF the baby unit, press the button on the top of the unit again and the green
LED on the front will go out.
Channel Selection
This system has two channels to operate on in case there is another product in the household
using the same frequency.
1.
To change the channel the system is using, slide the channel selection switch on the
left hand side of the baby unit to either CH1 or CH2.
2.
Both the parent and baby units must be on the same channel to operate and transmit
properly.
Note:
3 AAA batteries are required for both the parent and child units, batteries
are not included.