Leuze electronic GmbH + Co. KG
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
LV462B
[email protected] • www.leuze.com
Press + (both buttons) to enter setting function (mode)
1. Mode selection
1. Press and twice to return to "main screen" (output indicator light will turn green).
2. Press and hold button for 1.5 sec. to enter "setting selection" (output indicator light will turn blue).
3. Press or to switch "Mode page".
2. Settings
1. Press and twice to return to "main screen", saving last settings (output indicator light will turn green).
2. Press and hold button for 1.5 sec. Confirm settings (press for 1.5 sec., indicator light turns blue), auto
return to main mode.
3. Press or to switch "setting page"
4. Setting selection flashing, if you don’t make any choice, will return "main screen" after 5 sec.
2. Lock
1. off: All functions open without locking any function.
on: Set to lock all functions, only keep “main screen”, and button threshold value (after long press, up to
+10, -10 adjustment).
2. To unlock, press and at the same time in the "main screen" to directly enter loc mode and select off, which
is the unlock mode.
3. Setting selection flashing, if you don't make any choice, will return to "main screen" after 5 sec.
Threshold figures adjustment
Press once or the threshold figures start flashing (fig.1), press again or to start adjustment, leave and wait 3 sec.
Device will memorize the figures.
1 point setting
To select 1 point setting, press and hold button for 1.5 sec. The red display will read "good", the green display will
show the switching threshold. Teaching is completed.
L.on / D.on selections, please go to "output mode" to switch.
Auto teaching
(Fig. 1)
Return to main screen
Diffuse model Setting
Through-Beam model Setting
Press for 1.5 sec.
Auto-teaching is done
when red display reads "good".
Press for 1.5 sec.
Auto-teaching is done
when red display reads "good".
Detect ON
White
(Target)
Dark color
No Target
LV462B
Digital Fiber Amplifier
