Display and control panel
Leuze electronic
LES 36
52
TNT
35/7-2
4
V
7
Display and control panel
7.1
Indicators and operational controls
Figure 7.1:
Indicator and operating elements of the LES
After switching on the supply vU
B
and following error-free initialization of the device,
the green LED illuminates continuously: the LES is in measure mode. The OLED display
shows the alignment aid and the status display.
7.1.1
LED status indicators
7.1.2
Control buttons
The LES is operated using the
and
buttons, which are located next to the OLED
display.
OLED display
128 x 32 pixels
Key pad with 2 buttons
See "Control buttons" on
page 52.
Device LEDs
Green and yellow
Laser beam
LED
State
Display during measurement operation
Green
Continuous light
Sensor ready
Off
Sensor not ready
Yellow
Continuous light
Ethernet connection established
Flashing
Ethernet data transmission active
Off
No Ethernet connection
Table 7.1:
LED function indicator
