Leuze DCR 50 Operating Instructions Manual Download Page 14

Page: 14 / 92

Configuration and diagnostics software - Sensor Studio

Leuze electronic

DCR 50

Configuration and diagnostics software - Sensor Studio

The

Sensor Studio

configuration software provides a graphical user interface for the operation, configura-

tion and diagnosis of the device via the RS 232 interface.

A device that is not connected to the PC can be configured offline.

Configurations can be saved and reopened as projects for transferring back to the device at a later time.

NOTICE

Only use the

Sensor Studio

configuration software for products manufactured by Leuze elec-

tronic.

The

Sensor Studio

configuration software is offered in the following languages: German, Eng-

lish, French, Italian and Spanish.

The FDT frame application of the

Sensor Studio

supports all languages; all languages may not

be supported in the device DTM (Device Type Manager).

The

Sensor Studio

configuration software is designed according to the FDT/DTM concept:

• You make the individual configuration settings for the scan engine in the Device Type Manager (DTM).

• The individual DTM configurations of a project can be called up via the frame application of the Field

Device Tool (FDT).

• Communication DTM for scan engines:

LeCommInterface

• Device DTM for scan engine DCR 50

Procedure for the installation of the software and hardware:

Install the

Sensor Studio

configuration software on the PC.

Install the communication and device DTMs.
Communication and device DTM are included in the

LeAnalysisCollectionSetup

installation package.

Create DCR 50-DTM in the project tree of the

Sensor Studio

FDT frame.

Connect scan engine to PC (see chapter 5.4 "PC or terminal connection").

6.1

System requirements

To use the

Sensor Studio

configuration software, you need a PC or laptop with the following specifications:

Tab. 6.1:

System requirements for

Sensor Studio

installation

Operating system

Windows XP or higher (32 bit, 64 bit)

Windows Vista

Windows 7

Windows 8

Computer

Processor type: 1 GHz or higher

Serial COM interface

CD-ROM drive

Main memory (RAM): at least 64 MB

Keyboard and mouse or touchpad

Graphics card

At least 1024 x 768 pixels

Required hard disk capacity for

Sensor Studio

and communica-

tion DTM

35 MB

NOTICE

Administrator privileges on the PC are necessary for installing

Sensor Studio

Summary of Contents for DCR 50





























































































Search results

Summary of Contents for DCR 50

Reviews:

Related manuals for DCR 50

Brands by name

Popular brands

Leuze DCR 50, Operating Instructions Manual

Search results

Summary of Contents for DCR 50

Reviews:

Related manuals for DCR 50

Brands by name

Popular brands