Technical data
Leuze electronic GmbH & Co. KG
CSL 505
29
6
Technical data
6.1
General specifications
Optical data
Operating range
Approx. 300
…
5000 mm
3
(teach event mandatory)
Factory presetting: approx. 4 m
Operating range can be set by reversing polarity:
Approx. 300
…
1300 mm (reduced operating range) or
Approx. 1000
…
5000 mm (extended operating range)
Maximum number of beams
160 logical beams
Time behavior
Response time
Cycle time approx. 1 ms per beam plus basic time (approx. 4 ms).
After interruption of synchronization beam approx. 1-2 cycles.
Delay time at power-up
Approx. 810 ms + 1-2 cycles
Electrical data
Operating voltage
18 to 30 V DC with max. 10
% ripple.
Use reverse-polarity protected, grounded voltage supply!
Power consumption
Extended operating range
Nominal 3.1 W, peak 6.5 W (2
MHz,
100
µs)
Reduced operating range
Nominal 1.3 W, peak 2.3 W (2
MHz,
100
µs)
Switch-on current
Max. 7.5 A, 40 µs
Outputs
Push-pull switching current max. 150 mA
Input of transmitter
Positive switching; permissible input voltage 0 to 30 V DC
Input resistance typ. 6 kΩ; switching threshold typ. 4 V
Protective circuit
Polarity reversal protection, short circuit protection, inductive
protection for all outputs
Mechanical data
Light curtain housing
Aluminium, natural anodising, front cover made of plastic, dark red.
Connection
Receiver:
M8 plug, 4-pin
Transmitter:
M8 plug, 4-pin
Protection class
IP 65
Environmental data
Operating temperature
-30 °C to +50 °C
Storage temperature
-40 °C to +65 °C
Elevation
< 2000 m
Degree of contamination
2
3
approx. 1000 … 10000 mm for
-ER model
