Reflectors
Leuze electronic
AMS 301
i
33
TNT
35/7-2
4
V
Notice!
The reflector must be angled. To do this, use the spacer sleeves. Angle the reflectors so that
the
surface reflections of the foil seal are deflected to the left, right or upwards
6.4.3 gives the correct pitch with respect to the reflector size and, thus, the length of the
spacers.
Reflective tapes …-S and …-M
Figure 6.3:
Reflector mounting
Figure 6.4:
Pitch of the reflector
Pitch approx. 1°
Direct reflection from the
triad structure
Deflected surface reflection due to
the pitch of the reflective tape
Pitch approx. 1°
Spacer sleeves
