Display and control panel AMS 307i
Leuze electronic GmbH + Co. KG
AMS 307
i
43
TNT
35/7-2
4V
Selecting options
If options can be selected, the display looks like this:
Select the desired option with the
buttons. Activate the option by pressing .
8.3
Menu description
8.3.1
The main menus
After voltage has been applied to the laser, device information is displayed for several
seconds. The display then shows the measurement window with all status information.
o OFF
ON
Default ----------------- Unit
OFF
| |
AMS 307i 120
Leuze electronic
GmbH & Co. KG
SW: V 1.3.0 HW:1
SN: ---------------
Device information - main menu
This menu item contains detailed information on
• Device type
• Manufacturer
• Software and hardware version
• Serial number
No entries can be made via the display.
IO1 LSR PLB
IO2 TMP ATT
ERR
SSI
+ 87.000m
Status and measurement data - main menu
• Display of status, warning and error messages.
• Status overview of the switching inputs/outputs
• Bar graph for the received signal level.
• Measurement value
No entries can be made via this mask.
See "Indicators in the display" on page 39.
Parameter
Parameter handling
SSI
Position value
I/O
Other
Parameter - main menu
• Configuration of the AMS.
