Leuze electronic VisionREADER 2300 Technical Description Download Page 53

Page: 53 / 66

Leuze

electronic

Communicating with the Device

Leuze electronic

VR 2300

TNT

35/7-2

9.3.16

Communication window

This panel permits the configuration of the setup interface and of the setup protocol.

Setup interface

Determines via which interface of the VR 2300 the Setup Tool can be
started. The choice includes COM1, COM2 and Ethernet.

Notice!

For the VR 2300, only the COM1 interface in connection with GModem protocol is suitable
as a setup interface.

Setup protocol

Determines the protocol that handles the communication with the Setup
Tool.

GModem

Handles the communication via the RS232 protocol without
hardware handshake.

SLIP

Transmits IP packets via the serial line using the SLIP
protocol.

PPP

Transmits IP packets via the serial line using the PPP
protocol.

Ethernet

Handles the communication via the Ethernet interface.

Summary of Contents for VisionREADER 2300



































































Search results

Summary of Contents for VisionREADER 2300

Reviews:

Related manuals for VisionREADER 2300

Brands by name

Popular brands

Leuze electronic VisionREADER 2300, Technical Description

Search results

Summary of Contents for VisionREADER 2300

Reviews:

Related manuals for VisionREADER 2300

Brands by name

Popular brands