Leuze
electronic
Installation
Leuze electronic
VR 2300
21
TNT
35/7-2
4
V
6.3.2
Connection of switching inputs and outputs
The VR 2300 is equipped with two switching inputs and two switching outputs. The connec-
tion of the switching inputs and outputs is carried out according to figure 6.4:
Figure 6.4: Connection diagram switching inputs and outputs VR 2300
Switching inputs
In the standard setting, you can trigger a reading action via the switching input connections
SWIN1/SWIN2 by applying a voltage of 12 … 30VDC between SWIN1 (pin 2) or SWIN2
(pin 9) and GND (pin 15).
Switching outputs
The switching output connections between SWOUT1 (pin 10) or SWOUT2 (pin 6) and GND
(pin 15) are normally open. In the standard setting, SWOUT1 is closed in case of a reading
error, SWOUT2 in the case of a detected code.
Notice!
You can configure the switching inputs and outputs according to your needs, using the pro-
gram supplied.
10 … 30 V
DC
12 … 30 V DC
SWIN2
9
SWIN1
2
SWOUT1
10
SWOUT2
6
GND
15
VIN
8
max. 100 mA
max. 100 mA
