Sensor adjustment (teach) via teach button
Teach for 11% sensor sensitivity (highly transparent bottles and foils with thickness > 20μm)
Press teach button until both LEDs flash
simultaneously.
Release teach button.
Ready.
After the teaching, the sensor switches
when about 11% of the light beam are
covered by the object.
Teach for 18% sensor sensitivity (standard bottles)
Press teach button until both LEDs flash
alternatingly.
Release teach button.
Ready.
After the teaching, the sensor switches
when about 18% of the light beam are
covered by the object.
The sensor is factory-adjusted for maximum
operating range.
Recommendation: teach only if the desired objects are not
reliably detected.
Prior to teaching:
Clear the light path to the reflector!
The device setting is stored in a fail-safe way. A reconfiguration
following voltage interruption or switch-off is thus not required.
2 … 7s
simultaneously
flashing at
3Hz
LED
green
LED
yellow
7 … 12s
alternatingly
flashing at
3Hz
LED
green
LED
yellow
PRK 55 ExRetro-reflective photoelectric sensors with polarization filter for bottles
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
