2014/07
Mounting
Step 1: Securing the Laser Alignment Aid to the mounting bracket
Set the LA-78M or the LA-78M-UDC Laser Alignment Aid on the mounting bra-
cket.
Fasten the Laser Alignment Aid with the knurled screw (
A
).
Step 2: Securing the Laser Alignment Aid
Set the guide pins of the LA-78M or the LA-78M-UDC Laser Alignment Aid late-
rally into the guide notch of the MLD safety sensor.
Align the Laser Alignment Aid in such a way that the upper edge of the mounting
bracket locks flush with the disc edge (
D
).
LA-78M: Fasten the Laser Alignment Aid with the knurled screw (
B
).
LA-78M-UDC: Tilt the Laser Alignment Aid between the sensor and the UDC
device column by pulling the lever down (
C
).
Step 3: Alignment of the Laser Alignment Aid on the MLD safety sen-
sor
Loosen the knurled screw (
B
) or lift the lever (
C
) to secure the Laser Alignment
Aid on the safety sensor.
Move the Laser Alignment Aid along the guide notch (
E
).
Align the Laser Alignment Aid in such a way that the upper edge of the mounting
bracket locks flush with the upper, middle or lower disc edge (
D
).
Retighten the knurled screw (
B
) or push the lever back down (
C
).
Only lower light beam:
Loosen the knurled screw (
A
) to secure the Laser Alignment Aid to the mounting
bracket.
Turn the Laser Alignment Aid by 180° (
F
), whereby the mounting bracket
remains fastened to the safety sensor.
Retighten the knurled screw (
A
).
Step 1
Step 2
Step 3
LA-78M
LA-78M-UDC
LA-78M / LA-78M-UDC
