Leuze electronic AMS 200, Technical Description, Page: 33 / 118

Control panel display AMS 200…
Leuze electronic AMS 200 29
TNT
3
5/7-2
4
V
6. 3 .2.2 Password for parameter enabling
The password query is deactivated by default. To protect against unwanted changes the
password query can be activated. The preset password is
0000 and can be changed as
necessary (see figure 6.4).
Notice !
In order to enter the password parameter enabling must be activated.
A selected password is saved with .
Figure 6.4: Changing the password
If the password is not known, the master password 2 3 01 can always be used to enable the
device.
Attention !
When operating the laser measurement system on the PROFIBUS, the password entered
on the display has no effect. The PROFIBUS overwrites the password with the default set-
tings.
PROFIBUS: If a password is desired for PROFIBUS operation, it must be configured via module 18 d, e
(see page 78).
E S C
E S C
E S C
E S C