28
FUNCTION 3: DISPLAY INTENSITY
This mode is used to adjust the brightness of the display,
allowing you to match the intensity to current conditions.
Your RX-1200
i
has three display intensity settings; low,
medium, and high.
Navigate through the Quick Set Menu by pressing and
releasing the MODE button until “DISP” is shown in the
lower display. Press and release the POWER button to toggle between high,
medium, and low. Press MODE to save the selection.
FUNCTION 4: UNIT OUTPUT
This mode is used to choose between yards and meters as
the preferred unit of measure. To choose between yards and
meters, navigate through the Quick Set Menu by pressing and
releasing the MODE button until “Unit” is shown in the lower
display. Press and release the POWER button to alternate
between yards and meters. Press MODE to save the selection.
Unit set to Yards (YD)
Summary of Contents for RX-1200i
