Tentris
™
ArcHaus
™
Manual
Step 5: Connect and Engage Tension System
- Clip ground fabric wrap to the Arc Cover.
- Tension bungee on each end to draw Cover
tightly and around the Arc Frame.
Step 6: Attach Modular End Panels of Choice
Zip on and off end panels of choice to inside zipper of Arc Cover at either or both sides. The ArcHaus™ may
be used with or without the end panels. Be sure to stake the ArcHaus corners and use guy lines.
Note that the outer zipper may be used for connecting two ArcHauses together with the ZipperMate™ option.
Contact Let’s Go Aero for purchasing information.
Parts
(Qty: 2) Door Panels with screens.
(Qty: 1) Connector Panel with buckles.
Step 7: Stake the Guy Lines & Corners of the ArcHaus
Locate the Guy Lines on all four sides of the tent. Untie the
Guy Lines and loop it into a stake that is provided. Extend
the Guy Line and drive the stake into the ground securing
the Guy Line.
Locate the loops at tent corners and drive the 12” stakes
supplied at each corner.
IMPORTANT NOTICE
Always stake down tent to prevent wind pull. When using on
pavement, use sand bags or comparable objects to anchor.
In windy conditions, use more heavy-duty stakes for reinforcement.
Available at your local retail outfitter or through Let’s Go Aero.