PAGE 3 OF 5
NOTE:
Users with Rack Bar accessories (sold separately) should read the section
“USE WITH RACK BAR
ACCESSORIES”
on page 5 before attaching the cover proceeding with this step.
With the Support Batons
[B]
in place on the Seal
Skin cover
[A]
, carefully turn the Cover
face up
and
lay the Cover over the trailer as shown [Figure 8].
NOTE:
The cover must be oriented so that front is
towards the tongue of the trailer. The front of the
cover is side of the cover with the accessory flaps
closest to the corners of the cover.
TIP:
For everyday
use, users may find
it easier to transfer
the cover on & off
the trailer by storing
the cover
rolled up
allowing the cover
to be easily carried
and un-rolled over
the trailer for quick
attachment.
Step 5:
FRONT
[Figure 8]
A
B
Step 6:
[Figure 9]
[Figure 10]
Starting with one corner of the trailer. Slide the Bungee end of the Small Bungee
[F]
through the top of the
Cover
[A]
. [Figure 9]
Wrap the Bungee end of the Small Bungee
[F]
around the End Gate Latch Hardware to secure the corner of
the Seal Skin Cover
[A]
to the trailer. [Figure 10]
Repeat this Step for all four corners of the Trailer.
END GATE LATCH
HARDWARE
END GATE LATCH
HARDWARE
A
F
F
ACCESSORY
FLAP
