JOINT
CONNECTOR
BOLTS
SIDE TUBE
AB
STEP 3
TOOLS: 10mm SOCKET WRENCH, 13mm SOCKET WRENCH, 13mm WRENCH
Use the remaining hardware to attach the horizontal pipe/vertical pipe assembly [
A,B
] as shown. [DETAIL 3]
[DETAIL 3]
SECOND
VERTICAL
PIPE
[DETAIL 4]
TIP: Note that the Rack-It can be combined with a
second Rack-It to adapt your GearCage cargo carrier
to hold even more bikes. If you add a second Rack-
It kit, you will end up with one extra “throw-away”
horizontal pipe. You will attach the vertical pipe from
the second Rack-It kit to the open end of the existing
horizontal pipe. [DETAIL 4]
STEP 4
REQUIRED TOOLS: 9/16” SOCKET WRENCH, 3/4” SOCKET WRENCH.
L
M
M
N
N
P
P
Q
Q
Attach V-Brace [
A
] to Vertical Pipe [
B
] using No-Motion Pin
[
M
] and Washers [
P,N
].
FOR SAFETY
insert Large Cotter
Pin [
Q
] through hole at the end of [
M
] after tightening [
M
]
securely.
[DETAIL 5]
[DETAIL 5]
