Assembly and Installation:
Unfold your BossHog HideOut Cover and drape over top of your BossHog Carrier, assembled BikeTree, and
customer supplied bicycles. Fit the thick Waist-Band of the HideOut Cover snuggly over the corners of the
carrier. Locate the adjustable Release Buckle underneath the velcro Storm Flaps and tighten the Waist-Band
until taut around the carrier. Once the Waist-Band is secured, tighten and connect the 2nd Horizontal Support
Strap located above the Waist-Band. Pull the Vertical Support Straps around the underside of the carrier and
back to meet at the top. Connect the Release Buckle and pull tight to secure your HideOut Cover and cargo to
the carrier.
Unfold the included DragNet and drape over top the secured HideOut Cover. Fasten all Molded Clips by
securing and evenly spacing them to anchor points located on the underside of the carrier.
Daily Operation:
Remove your DragNet and completely loosen and disconnect all Release Buckles except for the Waist-Band.
Locate the Coiled Zipper spanning along the top of the HideOut Cover and unzip. Remove or store any
needed cargo or Bicycles, re-zip the HideOut Cover, and reconnect and tighten all release buckles. Reconnect
DragNet.
HideOut Cover & DragNet devices are a weather-
resistant (not water-proof) cargo protectant
system, and not a cargo restraint.
Be sure to remove your DragNet and
completely loosen and disconnect all
HideOut Cover Release Buckles first before
removing the Cover off your cargo carrier to
avoid damage to your product.
WARNING
WARNING
PARTS LIST
Qty Description
1
HideOut Cover
1
DragNet Cargo Netting With Clips
Always check that HideOut Cover, DragNet & stored cargo are fully secured to the carrier before
transit to avoid loss or damage to your product & cargo. Multiple tie-down and strap positions are
located along the BossHog Cargo Carrier for supplemental ratchet and tie-down restraints when
necessary.
WARNING
HIDEOUT COVER & DRAGNET INSTALLATION
