manualshive.com logo in svg

Let's Go Aero GearSpace HGK819, Product Manual

Share
Download
Let's Go Aero GearSpace HGK819 Product Manual Download Page 1

Page 1 of 6

GearSpace® Cargo Carrier

34. cu. ft. Slide Out Mount System

Part No. HGK819 & HGK826

Installation & Safe Use Operation Highlights

For 2in Receivers Hitches and Class II Minimum Tow Rating. 

Weighs 160 lbs empty. Rated for up to 300 lbs of cargo payload.

PRODUCT MANUAL

Revision Date: 12/12/19

GearSpace-121219Rev

For More Information & Accessories, Visit our Website - www.LetsGoAero.com

For Technical Support & Product Questions Contact Us at 877-464-2376 or 719- 630-3800

Email: [email protected]

NOTICE: 

All Manual information is subject to change without notice. Revised editions 

will be available for free download at LetsGoAero.com. Manual information is considered 

factual until made obsolete by a revised version. 

 

Follow this QR-Code or visit  

LetsGoAero.com/manuals to check for an updated version:

Copyright

© 

2019, Lets Go Aero, Inc., All rights reserved.

Patent Numbers 6,409,203; 6,609,725; D717718 Patents Pending

For product updates and to register your product, visit the LetsGoAero.com/registration

Summary of Contents for GearSpace HGK819







Reviews:

No comments

Brands by name

Popular brands

Load more brands