Page 12 of 13
D
E
Starting with the wider set of Legs
[
A
] located
furthest from the vehicle, pull each Landing Gear Leg
parallel until each Engagement Tab releases [Figure 7,
8 & 9].
With the Engagement Tabs of both Legs [
A
] released,
push the Legs down until the Tabs re-engage in the
Deployed position [Figure 10, 11, 12 & 13].
Repeat Deployed Steps 1 & 2 for the thinner set of
Landing Gear Legs [
A
] located closest to the vehicle.
LEG EXTENSION:
With all four Landing Gear Legs [
A
] in the Deployed
position, press down on the Extension Levers located on each Leg [
A
]
working with each bonded set in tandem to release the wheel extensions
[Figure 14].
Slide each Leg [
A
] downward until they reach the ground.
LEG RETRACTION:
Press down and hold the Extension Levers to release
the wheel extensions [Figure 14].
Grabbing from the bottom of each wheel, push the Landing Gear Legs up
towards the carrier until desired Leg length is reached or the Legs become
fully retracted and release the extension.
DEPLOYING FOR MOBILITY USE - STEP 1
DEPLOYMENT - STEP 2
EXTENSION & RETRACTION
Extension
Lever
A
A
A
A
[Figure 8]
[Figure 7]
[Figure 10]
[Figure 11]
[Figure 14]
D
E
Engagement
Tab Engaged
ONLY TWO LEGS
SHOWN FOR CLARITY
ONLY TWO LEGS
SHOWN FOR CLARITY
ONLY TWO LEGS
SHOWN FOR CLARITY
[Figure 9]
Engagement
Tab Released
Engagement
Tab Released
Engagement
Tab Engaged
[Figure 13]
[Figure 12]
Landing Gear wheels may be deployed on
smooth & level
surfaces
only. Failure to adhere to product guidelines may void warranty.
NOTICE:
