Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
© 2013 Lesro Industries, Inc.
1. Unpack and identify all parts.
2. Assemble chairs individually according to chair
instructions. Arms with table bolt inserts must be oriented
to face each other when chairs are adjacent.
3. Attach leg plate to table leg using Phillips bolts into
threaded inserts, as shown in figure 1. Tighten securely.
4. Place the tabletop upside down on a soft, clean surface to
prevent scratches.
5. Attach leg to tabletop using Phillips screws through leg
plate into pre-marked holes, as shown in figure 2. Tighten
securely using care not to strip.
6. Attach slotted brackets to tabletop using bolts into
threaded inserts also as shown in figure 2. Be sure
brackets are flush with edge of tabletop. Keep bolts
slightly loose for now.
7. Position chairs about 2 feet apart, oriented as shown in
top diagram. Arms with bolt inserts must face each other.
8. Insert bolts about halfway into bolt inserts in facing arms,
as shown in figure 3 closeup.
9. Set tabletop between chairs, also as shown in figure 3.
The slotted brackets slide onto the bolts from step 8.
10. Press down on tabletop until arm bolts are fully inserted
into each of the bracket slots, as shown in figure 4. Be
sure back leg of table is resting on floor during this step.
Tighten all bolts securely.
11. Your product is now assembled and ready to use.
Feb 2013
Parts List
Tabletop
Table Leg & Leg Plate
Slotted Brackets, 4 pcs.
¾” Phillips Screws, 2 pcs.
¾” Phillips Bolts, 10 pcs.
Tools required:
Phillips screwdriver
Note:
These instructions are intended for various models and configurations. Your product
may not look exactly as shown in the diagrams.
Important:
Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity:
These tables are not intended for use as seats.
Assembly Instructions
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Figure 2
Figure 4
Brackets
flush to edge
Figure 3
Insert bolts
into arms
Figure 1
Leg Plate
Connecting
Corner Tables