Tools required:
Phillips screwdriver
Note:
These instructions are intended for various models and configurations. Your product
may not look exactly as shown in the diagrams.
Important:
Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity:
These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
1. Unpack and identify parts. Profiled edges of
tabletop face front and back.
2. Assemble chairs individually according
to chair instructions. Arms with table bolt
inserts must be oriented to face each other
when chairs are adjacent.
3. Place the tabletop upside down on a soft,
clean surface to prevent scratches.
4. Attach slotted brackets to tabletop using
bolts into threaded inserts, as shown in
figure 1. Be sure brackets are flush with
edge of tabletop. Keep bolts slightly loose
for now.
5. Position chairs about 2 feet apart. Arms with
table bolt inserts must face each other.
6. Insert bolts about halfway into bolt inserts in
facing arms, as shown in figure 2 closeup.
7. Set tabletop between chairs. The slotted
brackets should slide onto the bolts from
step 6.
8. Press down on tabletop until arm bolts
are fully inserted into the bracket slots, as
shown in figure 3. Tighten all bolts securely,
including bracket bolts from step 4 and arm
bolts from step 6.
9. Your product is now assembled and ready to
use.
© 2013 Lesro Industries, Inc.
Feb 2013
Assembly Instructions
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Parts List
Tabletop
Slotted Brackets, 4 pcs.
¾” Phillips Bolts, 8 pcs.
Figure 1
Figure 3
Brackets
flush to edge
Figure 2
Insert bolts
into arms
Profiled edge
Profiled edge
Connecting
Center Tables