7
Leslie 2121/2122/2123 Owner’s Manual
INPUT 2 Volume Control
This Rotary Control adjusts the level of the signal from the INPUT 2 jack.
INPUT 2 Jack
Use this jack to connect to an external sound device. The jack will accept a PHONE (1/4"
high-impedence) connection only.
INPUT 3 Volume Control
This Rotary Control adjusts the level of the signal from the INPUT 3 jack.
INPUT 3 Jack
Use this jack to connect to an external sound device. The jack will accept a PHONE (1/4"
high-impedence) connection only.
TONE Controls
The Treble and Bass Tones can be controlled separately with the use of these two Rotary
Controls. Turn each control to the left (counter-clockwise) for the minimum amount of
Treble or Bass. Turn each control to the right (clockwise) for the maximum amount of
Treble or Bass.
MASTER VOLUME Control
This Rotary Control allows you to control the total or maximum volume of the entire unit.
Turning this control clockwise will increase the total volume, while turning it counter-
clockwise will decrease the total volume.
REMOTE
The Leslie #2121/2122/2123 can be powered "ON" from the Leslie #2101/2102/2103 Rotary
unit by connecting the Rotary Unit to this receptacle via the enclosed DCC-2 cable.
NOTE: The AC Power Switch must be in the "OFF" position when using this feature.
WARNING: This receptacle is intended ONLY for the Leslie 2101/2102/2103. Attempting to connect
other instruments may seriously damage the unit.
POWER ON Light
This LED lights when the power is "ON."
LINE OUT Jack
Use this jack to connect another speaker or amplifier. This jack carries the sum of all incom-
ing signals, and is NOT affected by the TONE Controls or the MASTER VOLUME Control.
TW. LEVEL Control
This Rotary Control allows you to "fine-tune" the Treble response of the unit. Turning this
control clockwise will increase the amount of Treble, while turning it counter-clockwise will
decrease the amount of Treble.
8
9
:
!
$
%
&
(
b
a#
