6
POWER
ROT
BASS
LEVEL
HORN
LEVEL
ROT
BASS
LEVEL
HORN
LEVEL
2101 Standard Setting
2101 Setting for use with
the 2121 Stationary-Unit
Ë
Connecting the Leslie 2121 Stationary-Unit
To connect the Leslie 2121 Stationary-Unit to the Horn-Unit, do the following:
1.
Make sure the power to all units, including the connecting instrument, is “OFF.”
2.
Connect the Stationary Unit as shown below. Set the controls on the Stationary-Unit
similar to the settings shown below. Set the ROT BASS LEVEL and HORN LEVEL
trimpots on the Horn-Unit as shown.
NOTE:
the two LI-40 audio cables and the DCC-2 power connecting cable are supplied with the
2121 Stationary-Unit.
3.
Turn on the connecting instrument. Both Leslie units will be powered up
automatically.
4.
Finally, turn the MASTER VOLUME Rotary Control of the 2121 to the center (12
o’clock) position to check the sound level, then adjust the sound to your liking.
ROT BASS LEVEL / HORN LEVEL
These two Trim Pots can be adjusted using a small screwdriver.
= Minimum setting. = Maximum setting. = Center position.
It is recommended that you set these Trim Pots as shown when first making the connections, then
adjust them later to your preference.
