Dual Heating/Single Heating/Granules
EN
Replacement of Heating Element
LESITE
· Remove
· Assembly
Loosen the long hex socket screw (2) on the hot air blower connector (1) and the long hex
socket screw (4) on the hot air blower bracket (3) to remove the hot air blower (5) from the
plastic extrusion welder
Loosen the long Phillips screw (6) of the hot air blower and remove the air duct (7) and the
high temperature gasket (8) from the outer cover (10)
Slowly remove the heating element (9) from the outer cover (10)
Install the new heating element (9) in the outer cover (10)
Cover the high temperature gasket (8) and air duct (7) in order and lock them with the
long philips screw (6)
Install the hot air blower (5) in the plastic extrusion welder and fix it with the tighten long
hex socket screw(2) and the long hex socket screw (4)
1、Hot Air Blower Connector 2、Long Hex Socket Screw
3、Hot Air Blower Bracket
4、Long Hex socket Screw
5、Hot Air Blower
6、Long Philips Screw
7、Air Duct
8、High Temperature Gasket
9、Heating Element
10、Outer Cover
