LST-WP4
EN
Positioning Before Welding
2、Lifting Handle
12、Fixing Screw
10、Front Wheel
5、Driving
Pressure Wheel
Lower Film
13、Guide Wheel
upper membrane edge
Upper Film
Press the Lifting Handle (2) to raise the welding machine and move it to the welding
position (the edge of the upper film is aligned with the side edge of the Driving Pressure
Wheel (5), and the edge of the upper film is also aligned with the edge of the Guide
Wheel (13)), loosen the Locking Screw (12) to adjust the position of the Front Wheel (10)
from left to right, and tighten the Locking Screws (12) after adjusting, as shown in Figure.
