
After using period of time, the material residue might be stuck on the blade, please
use wire brush to clean.
LH8100/LH8150/LH8200/LH8250
EN
Operation
Installation of Blade
Clearance of Blade
LESITE
04
1、Turn on the power.
2、Adjust the temperature button, the higher the temperature if rotated inward and
the lower the temperature with outward rotation.
3、Press the temperature button and put the blade on the object. Turn it on and
warm up for seconds. It recommended to test cutting waste materials before cutting.
4、In the process of use, when the blade reaches the cutting temperature, intermittent
point switch to maintain the consistency of temperature and speed, improve the work
efficiency, prolong the service life.
5、Attention: it is recommended to keep the temperature stable by intermittently
releasing the heating switch after 10-15 minutes of continuous heating to prevent
overheating and damage to the Electric Hot Cutter.
1、When the tool is cool and not energized, unscrew the two nuts clamping the knife
leg with hexagonal wrench in counter-clockwise direction.
2、Insert two legs of the blade into the holes of the two cutting heads and then
tighten the two nuts to ensure knife legs and cutting heads in full contact. I
mproper assembling would not heat up the blade.