Lervia KH 2424, Instruction Manual

Page: 6 / 66

Operation
First carry out a test on an unobtrusive area to be
certain that the material to be cleaned is suitable for
high pressure steam, for instance:
• Painted wood or leather can be bleached by
steam.
• Unprotected wood can expand.
• Protective wax coatings can be removed by steam.
• Plastics can become tarnished from the effects of
steam.
• Soft plastics can deform when exposed to steam.
• Cold glass or mirror surfaces can crack when
sprayed with hot steam.
• If you wish to clean windows, you must first pre-
heat them, for instance by applying the steam over
large areas from a greater distance, then moving
in progressively closer.
• Draw the glass attachment
i
in sweeps from top to
bottom over glass surfaces. Wipe the rubber edge
and the lower window border dry with a cloth
after every sweep.
• Acrylics, velvet and linen react sensitively to hot
steam, as do plastic fibres.
Attaching /Removing Accessories
• Select a suitable accessory (
i
-
a
,
f
-
h
) as per the
details in the chapter „Appliance description and
accessories“ for the proposed cleaning task.
• Attach the accessory to the front of the connec-
ting nozzle
y
, such that the locking button
u
engages in the recess on the accessory.
• To release it, press the locking button
u
down and
pull the accessory off.
• To use the angle nozzle f or the round brush g ,
the narrow-jet nozzle h must first be attached.
• Attach the angle nozzle f or round brush g , up
to the marking on the narrow-jet nozzle h .
• If using the multi-purpose nozzle o , place the tex-
tile overlay a on the multi-purpose nozzle o .
Filling with Water
Warning:
Before refilling with water:
• Allow the appliance to cool down, to avoid
being scalded.
• Remove the plug from the power socket, to
avoid the risk of an electric shock.
- 4 -
IB_KH2424_GB_LB4 20.09.2007 20:01 Uhr Seite 4