Lervia KH 1148, Operating Instructions Manual

Page: 9 / 12

- 7 -
The fan switches on and the control
lamp
lights up in red.
The Fan Heater is fitted with switching
levels:
Oscillation function
The Fan Heater is fitted with an
automatic oscillation function.
• Place the switch for the oscillation
function into position „I“.
The Fan Heater slowly swings itself alter-
natively in both sideward directions.
• When you wish to finish the oscilla-
tion function, place the switch for the
oscillation function
into position
„O“.
Switching off
1. When you wish to switch off the Fan
Heater, place the function switch
in the position „0“.
Position Status of the Fan Heater
0 OFF
Fan, no heating
1
Warm air flow
(1000 W)
2
Hot air flow
(2000 W)
• After every use remove the plug
from the wall socket.
Room temperature setting
• Place the function switch on
the desired heating level, 1 or 2.
• Turn the thermostat regulator
to HI.
• As soon as the desired room tempera-
ture has been reached, turn the ther-
mostat regulator
slowly back, until
a light resistance is felt and a click is
heard.
The Fan Heater now switches itself on
automatically as soon as the temperatu-
re falls below the programmed level.
When the temperature in the room
falls below the programmed level,
the Fan Heater switches itself on
automatically. The Fan Heater swit-
ches itself off automatically as soon
as the programmed temperature
has once again been reached.
Transportation / Storage
Danger of Burns!
Only carry the Fan Heater with the carry-
ing handle provided for the purpose
.
Attention
Pack the Fan Heater away when it has
first cooled down. Otherwise, you could
burn yourself and damage other items.
• Should you wish to store the applian-
ce for an extended period or send it
through the post, use the original
packaging.
KH 1148
KH1148_Heiz_IB_UK 10.08.2006 11:52 Uhr Seite 7