13
Installation and connections
5690 en - 2018.03 / a
Field RTC Keypad
en
Step 2:
Connect the RJ45 keypad cable to the Commander ID300/302 connector.
Step 3:
Power on the drive. Make the required application settings with the keypad.
Step 4:
Once settings are finalized, power down the drive. Wait 10 minutes then unplug
the RJ45 connector from the drive.
Step 5:
Screw the cover again on the drive.
Adhere to the tightening torque (2 N.m for sizes 1 or 2 and 5 N.m for size 3) in
order to avoid damage to the threading and to maintain IP55 protection. Avoid
damaging the seal of the drive cover.
Size 3
Size 1 or 2
RJ45
2
RJ45
2
Size 3
Size 1 or 2
5
5
