- 8 -
The UP/DOWN keys change the value for the start address. The ULD-340 uses
the changed value immediately and permanently saves it after 10 seconds or if
the Enter or Menu key is pressed.
After power on, the ULD-340 remains in the Address Menu in its simple interface
mode. To go to any other menu requires the user to hold the MENU key for about
5 seconds.
Channel Mode Menu
The Channel Mode Menu allows setting the mode of each dimmer channel.
This mode is indicated by the letter ‘c’ in the display:
c2
: Ln
Set the mode for the displayed channel by pressing the UP/DOWN keys. The
possible channel modes are:
Mode
Description
Ln
Linear output. Standard dimmer channel.
Nd
Non- dim. Fader input above 60% turns on channel to 100%. Input
below 40% turns off channel.
FL
Florescent output. Dimmer does not begin to turn on until 20%.
00-FF
Fixed output level. Values are 0, 10-99 and FF. FF is 100% output.
After changing the mode the colon will blink to indicate new data has been
entered. Press the ENTER key saves the change, and advance to the next
channel.
The LD-340 returns to the Address Menu automatically after 4 seconds if no
keys are pressed in the Mode Menu.
