C:\LEPMIS\PRD\PS3-SAP\MNL\Issue 7\PS3-SAP_MNL_7.doc Page 5 of 8
5
OPERATING INSTRUCTIONS
For PlayStation3:
Connect PS3-SAP to your PS3 using the USB charging cable supplied with
your PS3.
For Xbox360, Xbox One, PlayStation4:
Connect a wired standard controller to your console via
the relevant cross-converter device as recommended by LEPMIS. Once the standard controller is
working normally, also connect PS3-SAP to the cross-converter.
Note: PS3-SAP will only work so long as the USB cable is plugged in, as the unit does not
have an internal battery.
The PS3-
SAP ‘PS’ logo will glow blue when receiving power from your
console.
Press the ‘PS’ logo button to establish a link between PS3-SAP and your console.
Connect your analogue joystick (may require an adaptor to match PS3-SAP Analogue Port
Specification) and your accessible switches.
Please note that the action of un/plugging will cause a momentary switch closure, interacting with
any game you may be playing. Pressing Up & Down together will result in NO switch action.
Similarly with Left & Right. An
6
PROBLEM SOLVING & WARRANTY
Check your games console is providing power to PS3-SAP (logo glows on PS3-SAP)
– if not try
a different USB cable, or check the suspect cable works with a standard controller.
Check your games console sees PS3-SAP as controller 1 (some games only respond to
controller 1)
Always check that your switches or joystick are working correctly before suspecting this unit, as
the wires on many commercial switches are known problem areas.
PS3-SAP is covered by LEPMIS for mechanical failure repair costs for 12 months from the
delivery date (See the terms and conditions on our website).
AVOID getting fluids or foreign material into the sockets as they will either corrode or become
jammed up, and stop working. Failure of the sockets in this way is not covered by the warranty.
If you require further help, please contact LEPMIS with fault details and include unit Type, Date
of Manufacture and Serial Number as described on the labelling of the unit.
7
CLEANING INSTRUCTIONS
When necessary, the PS3-SAP case should be cleaned with a barely damp cloth, using only a
tiny amount of household detergent. DO NOT USE abrasive products or solvents.
