background image

CARE & MAINTENANCE

Use only a soft and dry cloth to clean the outside parts of the clock. Dust 

and particles contained in the cloth could scratch parts. Do not use any 

kind of cleaning products to wipe the clock. 

It is recommended to keep the clock distant from any source of heat or 

vibrations. Do not permanently expose the clock to direct sun light, never 

place  the  clock  in  a  humid  or  dusty  place.                                                                                                                                      

Our clocks are developed to ensure optimal accuracy and reliability. It is 

well accepted for a fine mechanical clock to have a few seconds variation 

per day and our clocks are set so as not to delay. 

However if you should notice a wider variation, please contact an autho-

rized dealer who will advise you, or L’Épée 1989 technical support center 

which will proceed with the necessary adjustment.                       

                                                                                            

As for all horological pieces of art, it is recommended to periodically  

service your clock. 

A mechanical masterpiece requires fine oils for the lubrication of the mo-

vement. They are deteriorating  with the time. We therefore advise to 

have the movement overhauled every five years. Never try to clean the 

movement or the hands.

NEVER FORCE ON THE WIND UP - 
IF IT IS BLOCKED, THEN IT IS FULLY WOUND UP.

Summary of Contents for LA TOUR













Reviews: