GB
|
1
INTRODUCTION
Universal emulator of the Oxygen Sensor to cars with different types of Voltage Oxygen/Lambda
sensors/ Zirconia sensors and Titania sensors:
1V
(0..1V, 1..0V),
5V
(0..5V, 5..0V),
1V
(0.8..1.6V),
1V
(2.5..3.5V) Denso,
and others.
The Emulator is configured using the service program from your PC via the USB interface. By
using the service program, it is possible to fit the emulator to emulate any type of voltage
/rezystancyjnej sensors and generate a wave of any shape and character (level, filling, etc.).
It Is intended primarily for the emulation of the front sensor (before the catalyst converter), but
also, in many cases, regulations, rear sensor
The task of the emulator is to prevent logging by the computer, the error "invalid adjustment
petrol mixture, the error probe lambda, errors of the inoperable catalyst.
Emulator replaces the signal from the lambda probe its so that the driver of the engine receives
the optimal information about reading.
Emulator can be used in vehicles without/with the installation of gas LPG/CNG or HHO
installation, in particular for vehicles with:
Oxygen/Lambda sensor malfunction,
Malfunction, deleted or the low efficiency of the catalyst, and the computer displays error
engine inoperable (low performance) the catalytic converter,
Installation of gas 1, 2, 3 or 4 generations. Inter alia, such that uses manual regulation of
the supply of gas (screw). Where the computer engine light control "engine vulnerability"
when starting work on LPG, because the lambda probe mounted before the catalyst
detects too rich a mixture.
TECHNICAL DATA
Power Supply
12V ±25%
Operating temperature
-40..90°C
Emulation type
Wave sets from Service Program via USB
Tightness class
IP66
