LEO ACm150 Instruction Manual Download Page 13

Acquaer Ltd. 

 

 H-

4900, Fehérgyarmat, Szatmári út 11.

 

 

Guarantee terms 

Please carefully retain the guarantee card completed by the seller, or the proof 
of purchase. 

 

Pre-conditions for the 24-month guarantee entitlement: 

- Deployment of the device solely for private use.  

The guarantee is reduced to 12 months in the commercial sector or leasing 
business.  

- Proper handling and observance of all information given in the operating manual, 
which forms part of our guarantee terms. 
- Observance of the prescribed maintenance intervals  
- No unauthorized alteration of the design.  
- Presentation of the completed guarantee card and/or proof of purchase.  
 

Any  guarantee  claim  shall  be  immediately  void  in  the  event  of  unauthorized 
repairs.  Faults and defects, which can be traced to material  or manufacturing 
faults will be rectified exclusively by our contracted workshops (the seller has 
the right to remedy a defect) in your vicinity or by the manufacturer if the latter 
is closer. Any claims going beyond the provision of a guarantee are ruled out. 
Any  transport  damage  should  be  reported  not  to  us  but  to  the  shipper  in 
question  since,  otherwise,  any  compensation  claims  the  shipper  would  be 
voided. 
 
Information concerning the packaging materials  

The used packaging materials must be thrown into the relevant waste collector. 

In case of the need of any parts, questions or service instructions please 
contact: 

 

[email protected] 

 

+36 30 508-6563 

 

Acquaer Ltd., 4900 Fehérgyarmat, Szatmári u. 11 certifies CE conformity of the 
above-mentioned product and that it complies with the technical data specified in the 
data plate and the “Operating instructions”.

 

 
You can get detailed information about the CE declarations at: 

www.gamagarden.eu

 

 

Summary of Contents for ACm150














Reviews: